RKS+CAN Adapter für CAN-Bus Sniffing
CAN-Interface
CAN Hardware, CAN Software, CAN Protokolle - CAN-Bus Forum für Dein CAN-Bus Projekt. CAN-Bus und Elektronik.

Investigating Engine CAN messages


 
Neues Thema beginnen Auf Beitrag antworten Weitergeben, Thema teilen Lesezeichen setzen Druckansicht CANhack.de - Übersicht » Motor CAN
Autor Nachricht
benzman
Gast




 


Kostenloser Account, kein CAN Entwicklungs-Support

Beitrag08-10-2007, 14:18    Titel: Investigating Engine CAN messages Antworten mit Zitat

Hello,
I got interested in CAN because I don't like being unable to fix my car myself. The very best example I have seen so far is http://pikkupossu.1g.fi/tomi/projects/i-bus/i-bus.htmland of course Attila Vass : http://www.vassfamily.net/ToyotaPrius/CAN/cindex.html.
Very impressive work.
Anyway, I have been collecting data from my 2000 Mercedes ML270, to work out what is what. This car has a different set up from new models - the bus is split up Can-H Can-L around the car.Only some nodes have both lines. (500Kbit)
By parsing log files into Excel, and matching with a GPS log, I have been able to identify :
Engine RPM (2 byte)
Steering angle (2 byte)
Brake pressure (2 byte)
Wheel speed 4 x 2byte pairs
Engine temp 1 byte
icon_biggrin.gif
I collected 37000 messages over 20Km (29minutes) - lots at 20ms or 25ms

I am still trying to identify engine torque / MAF / manifold vacuum. The other parameters in there somewhere are accelerometer data and wheel slip ratios - for ASR/ESP.
There are many messages with a mixture of 'analog' data as well as what I would call flag bytes -with individual bits set or un set- mostly switches - or to operate lamps as far as I can see
Graphing inside Excel is tricky - as the 2-byte data does not look quite right in the raw state. If anybody else has positively identified the Mercedes module addresses I would like to hear about it !

My German is not good enough to post with ! ?try Google language tools http://www.google.co.uk/language_tools?hl=de?
I use it for some of your posts icon_wink.gif

Graeme


Zuletzt bearbeitet am 11-01-2012, 13:24, insgesamt 1-mal bearbeitet.
Nach oben
musicboy007
Gast




 


Kostenloser Account, kein CAN Entwicklungs-Support

Beitrag24-07-2013, 19:01    Titel: Can Bus Speed Antworten mit Zitat

Hello!

I need the ID of the ABS-ECU. Could you tell me, what you did find out with the Speed-Signal which comes from ABS.

Many Thanks
Andreas
Nach oben
Neues Thema beginnen Auf Beitrag antworten Weitergeben, Thema teilen Lesezeichen setzen Druckansicht CANhack.de - Übersicht » Motor CAN
Ähnliche Fachartikel und Themen
Thema Community Bereich
Keine neuen Beiträge Mercedes W211 CD box messages Innenraum- / Komfort CAN
Keine neuen Beiträge Mercedes W204 EIS/EZS canbus messages Allgemein
Gehe zu:  
Du kannst keine Beiträge in dieses Forum schreiben.