CAN matrix Ford Mondeo

Hello everyone,
My girlfriend bought a Ford Mondeo station wagon from 2007.
Besides the cowhide seat covers and cow-print stickers, the old car radio is now going into the Mondeo (although I just received a text message saying that new seat covers are going to be installed – probably with a shark fin design or a squirrel imitation).
This radio is part of the high-end series of current Chrysler models (it's simply the best functional unit available right now).
These are accessed via Can.
For the previous car, I used an analog-to-CAN board to convert the analog input signals into the appropriate Chrysler CAN matrix.
In the Mondeo, the analog signals are no longer present, and the steering wheel remote control is also intended to be used.
Therefore, I will probably now build a CAN-to-CAN converter.
On the input side, we have the Mondeo CAN matrix, and on the output side, the Chrysler matrix.
To save myself hours of trial and error with a Can-Spy, I need the Mondeo CAN matrix.
The following data points are particularly interesting:

Ignition
Speed.
Reverse.
Lighting.
Brightness.
all the controls on the steering wheel

Can someone provide me with the identifiers for this?
If not, I have another few sleepless nights ahead of me.

Hello Normen,


Baudrate: 125 kBit/s standard Format

Kl15. :
285 3 00 00 00 109 19476 Zündung: D0: 0x00 kein schlüssel 0x10=Z1, 0x20 = Z2, 0x30 starten

Rückwärtsgang.:
433 8 C0 00 00 00 00 A0 00 00 27 67910 Rück: D3 =0x02 = Rück, 0x00 kein Rück

Licht:
289 8 00 00 00 00 00 00 00 00 109 9751 Licht: D0,D1 0x0000 =aus, 0x03FC Licht an (auch nur standlicht)

MFL:
2D5
2D8
Wenn ich mich richtig entsinne werden obige ID's vom OEM-Radio gesendet, da die LFB-Tasten analog abgefragt werden,da ich hierfür schon mal eine kleine Adapterplatine mit einem ATiny26 gebaut hatte:

5 kohm : keine Taste gedrückt
150 ohm : Volume +
55 ohm : Voumel -
1kohm : Menütaste
560 ohm : track -
300 ohm : track +

In particular, the following data are of interest:

Ignition
Speed.
Reverse.
Lighting.
Brightness.
all the controls on the steering wheel

Can someone provide me with the identifiers for this?
If not, I have some sleepless nights ahead of me.

Sure, let me know if this works:



Let me know if the IDs match. If not, then please check the following IDs:
Kl15: 0x48
Speed: 0x84 (D1 = high byte, D2 = low byte = speed * 100)

But you will probably still have a few sleepless nights .
You can post your results here.

Have fun!

Regards,
Andi.