Audi A3 8P mittleren FIS Bereich beschreiben, Grundlagen | Posts 16+

Hi, I'm working on an Audi S3 8L (with a red 64x88 FIS), and I'm developing a Visual Basic interface to control the FIS. All your information is perfect. If I could ask for a little more detail about the graphical part of the mid-FIS. For example, how do you write a pixel as a line in your example? To write text, no problem: 57 - nb_byte - options_byte - x_byte - y_byte - data_0_byte - data_1_byte and so on...
But regarding the graphic? 57 - nb_byte - ??? - ??? Please, if you can help me...

GerdJ wrote:

Hi Michal, It's great to see you here again . Thank you very much for sharing your information. To the best of my knowledge, the newer ICs (such as mine, which has the part number 932 at the end) do not support the Telematics protocol. But for older ICs, this information is very helpful . BTW, the following picture shows the FIS resolution. The upper dotted line represents the normal resolution (64x48 pixels), and the lower dotted line represents the high resolution (128x96 pixels). I call it Subpixel . The following photo shows the FIS resolution. The upper dotted line is at normal resolution (64x48 pixels), and the lower dotted line is at high resolution (128x96 pixels). I call these subpixels

.