Does anyone have a VW/Audi TV tuner? Need a CAN log

Hey everyone, I've been searching the internet for a week now to figure out how to emulate the TV tuner on the MFD1 navigation system. I'm just missing the initialization sequence of the TV tuner within the navigation system. Specifically, I need the CAN traffic between IDs 0x464 and 0x264 when the navigation system is turned on, as well as the 'alive' signals during operation.

Ich will dann die Tasten ausgeben lassen.

If someone still has a TV tuner, could someone please log the traffic and either post it here or send it to me via email: <!-- e --><a href='mailto:reinke@gmx.net'>reinke@gmx.net</a><!-- e -->

Thank you in advance!

Hello,

sind nur 2 Bytes 0xA1 0x01, die zur Initialisierung und als Keepalive immer schön regelmäßig mit 1000ms Zykluszeit zu senden sind.

DMost navigation systems are quite generous and accept delays of up to 5000ms, although occasional frame drops may occur. However, with these values, achieving good performance is not really critical in terms of timing.

Best regards,

Mike320Most navigation systems are quite generous and accept delays of up to 5000ms, although occasional frame drops may occur in between. However, with these values, it's not really a time-critical or performance-sensitive issue to implement.Best regards,