RKS+CAN Adapter für CAN-Bus Sniffing
CAN-Interface
CAN Hardware, CAN Software, CAN Protokolle - CAN-Bus Forum für Dein CAN-Bus Projekt. CAN-Bus und Elektronik.

Jeep > 2013 ignition on message ID | Beiträge 16+


 
Gehe zu Seite: Zurück  1, 2
Neues Thema beginnen Auf Beitrag antworten Weitergeben, Thema teilen Lesezeichen setzen Druckansicht CANhack.de - Übersicht » Allgemein
Autor Nachricht
gapco



CAN Hacker seit: 12.12.2011
Beiträge: 20
Karma: +1 / -0   Danke, gefällt mir!
Wohnort: Johannesburg,South Africa

CAN Support

Beitrag20-11-2016, 14:40    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

marian hat folgendes geschrieben:
What year is your radio?


Jeep change the interior CANBUS baud rate from 83.3kps to 125kps which happened middle 2008.

So any radio before middle 2008 will run at the baud rate 83.3kps.

Do you have the KL15 ignition on IDs ?

Many thanks
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
marian



CAN Hacker seit: 03.10.2016
Beiträge: 13
Karma: +1 / -0   Danke, gefällt mir!


Kostenloser Account, kein CAN Entwicklungs-Support

Beitrag20-11-2016, 15:36    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

Here you are icon_smile.gif

ID: 000, LEN: 6, MSG: 63 00 00 00 00 00
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
CAN-Diagnose
Administrator
Administrator
Avatar-CAN-Diagnose

CAN Hacker seit: 07.06.2011
Beiträge: 538
Karma: +27 / -0   Danke, gefällt mir!
Wohnort: Ländle



Beitrag20-11-2016, 15:41    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

marian hat folgendes geschrieben:
Here you are icon_smile.gif

ID: 000


icon_question.gif
Dipl.-Ing. (FH) Rainer Kaufmann - Kaufmann Automotive GmbH
CANhack.de CAN-Bus Interface RKS+CAN: CAN-Bus Interface
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden Website dieses Benutzers besuchen
marian



CAN Hacker seit: 03.10.2016
Beiträge: 13
Karma: +1 / -0   Danke, gefällt mir!


Kostenloser Account, kein CAN Entwicklungs-Support

CAN-Diagnose gefällt das.
Beitrag20-11-2016, 16:12    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

Strangely ID, but yes, it's zeros (ignition frame / low speed < 2012) icon_smile.gif


Zuletzt bearbeitet am 20-11-2016, 16:13, insgesamt 1-mal bearbeitet.
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
gapco



CAN Hacker seit: 12.12.2011
Beiträge: 20
Karma: +1 / -0   Danke, gefällt mir!
Wohnort: Johannesburg,South Africa

CAN Support

Beitrag20-11-2016, 17:04    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

marian hat folgendes geschrieben:
Here you are icon_smile.gif

ID: 000, LEN: 6, MSG: 63 00 00 00 00 00


Thank you I already know these.There is another ID which works together with this.It's the AMP ID. What this does it sets the radio rear audio outputs to a fixed level and disables the front audio output.

Then the external amplifier does the audio fading front to rear.

There is also the RAP ID. This allows the radio to remain on for 30 minutes after the ignition key is removed.

I had these ID but lost them.

Thanks again.
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
marian



CAN Hacker seit: 03.10.2016
Beiträge: 13
Karma: +1 / -0   Danke, gefällt mir!


Kostenloser Account, kein CAN Entwicklungs-Support

Beitrag20-11-2016, 17:41    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

No problem icon_smile.gif

The front speakers have excluded where radio comes with a car that has an amplifier.
This information is stored in the memory (eeprom).

The second ID is:
ID: 000, LEN: 7, MSG: 48 99 C0 00 00 00 00
or
ID: 416, LEN: 8, MSG: FD 3E 3F FF FF FF FF FF


Zuletzt bearbeitet am 20-11-2016, 21:13, insgesamt 4-mal bearbeitet.
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
gapco



CAN Hacker seit: 12.12.2011
Beiträge: 20
Karma: +1 / -0   Danke, gefällt mir!
Wohnort: Johannesburg,South Africa

CAN Support

Beitrag27-11-2016, 14:44    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

marian hat folgendes geschrieben:
No problem icon_smile.gif

The front speakers have excluded where radio comes with a car that has an amplifier.
This information is stored in the memory (eeprom).

This is not correct. The AMPID is stored in the car and not the radio EEPROM. The EEPROM contains the radio security code,memory of stored radio stations and some CD changer information.

The second ID is:
ID: 000, LEN: 7, MSG: 48 99 C0 00 00 00 00

This ID seems to have no effect on the ignition messaging

or
ID: 416, LEN: 8, MSG: FD 3E 3F FF FF FF FF FF


The 416 ID is sent to the radio every few seconds to keep the radio from switching off in the car. On the test bench you need only to send the OOO ID at a rate of 100ms and the radio will be happy
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
gapco



CAN Hacker seit: 12.12.2011
Beiträge: 20
Karma: +1 / -0   Danke, gefällt mir!
Wohnort: Johannesburg,South Africa

CAN Support

Beitrag27-11-2016, 14:48    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

marian hat folgendes geschrieben:
Yes, it is information from the radio connected to emulator on the bench.
This information should be in your log, because they are sent to the EVIC, etc.
Radio needs to receive information about ignition.
So I'm looking correct frame icon_smile.gif


If you have the radio connected on the bench with an emulator then you have the ignition ID's already.You can read these ID's easily if you have a CANBUS sniffer and software.

Maybe I am missing what you are actually looking for?
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
marian



CAN Hacker seit: 03.10.2016
Beiträge: 13
Karma: +1 / -0   Danke, gefällt mir!


Kostenloser Account, kein CAN Entwicklungs-Support

Beitrag05-12-2016, 21:01    Titel: Jeep > 2013 ignition on message ID Antworten mit Zitat

If anyone has a log of 2016 and may share it?
I will be grateful.

Regards,
marian
Nach oben CAN Hacker - Profil anzeigen Private Nachricht senden  
Neues Thema beginnen Auf Beitrag antworten Weitergeben, Thema teilen Lesezeichen setzen Druckansicht CANhack.de - Übersicht » Allgemein
Gehe zu Seite: Zurück  1, 2
Ähnliche Fachartikel und Themen
Thema Community Bereich
Keine neuen Beiträge Jeep KL 2014 radio log CAN-Bus Allgemein
Keine neuen Beiträge Lampenfehlermeldung / bulb error message [Golf V / Octavia2] Innenraum- / Komfort CAN
Keine neuen Beiträge K-CAN BMW Model F31 320d Bj 2013 Innenraum- / Komfort CAN
Keine neuen Beiträge Mercedes W221 ignition ID Innenraum- / Komfort CAN
Gehe zu:  
Du kannst keine Beiträge in dieses Forum schreiben.